NRLMW Datasheet | NIC-Components

.. Large Can Aluminum Electrolytic Capacitors Features - LONG LIFE (105°C, 2000 HOURS) - LOW PROFILE AND HIGH DENSITY DESIGN OPTIONS - EXPANDED CV VALUE RANGE Ro HS - HIGH RIPPLE CURRENT pliant - CAN-TOP SAFETY VENT includes all homogeneous materials - DESIGNED AS INPUT FILTER OF SMPS - See Part Number System for Details - STANDARD 10mm (.400") SNAP-IN SPACING SPECIFICATIONS Operating Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Max. Leakage Current (µA) After 5 minutes (20°C) Max. Tan δ at 120Hz/20°C Surge Voltage -40 ~ +105°C -25 ~ +105°C 10 ~ 250Vdc 450Vdc 180 ~ 68,000µF 56 ~ 470µF ±20% (M) at 120Hz, +20°C 3x C(µF)V NRLMW Series Ripple Current Correction Factors Low Temperature Stability (10 to 250Vdc) Load Life Test 2,000 hours at +105°C Shelf Life Test 1,000 hours at +105°C (no load) Surge Voltage Test Per JIS-C-5141 (table #6, #4) Surge voltage applied: 30 seconds "On" and 5.5 minutes no voltage "Off" Soldering Effect Refer to MIL-STD-202F Method 210A W.V. (Vdc) Tan δ max. W.V. (Vdc) S.V. (Vdc) W.V. (Vdc) S.V. (Vdc) Frequency (Hz) 16 ~ 100Vdc Multiplier at 85°C 160 ~ 450Vdc Temperature (°C) Capacitance Change Impedance Ratio Capacitance Change Tan δ Leakage Current Capacitance Change Tan δ Leakage Current Capacitance Change Tan δ Leakage Current Capacitance Change Tan δ Leakage Current 10 16 25 35 50 63 80 100 ~ 400 0.55 0.45 0.35 0.30 0.25 0.20 0.17 0.15 10 16 25 35 50 63 80 100 13 20 32 44 63 79 100 125 180 200 250 400 450 220 250 300 450 500 50 60 100 120 500 1K 10K ~ 50K 0.93 0.95 0.99 1.0 1.05 1.08 1.15 0.75 0.80 0.95 1.0 1.20 1.25 1.40 0 -25 -40 -5% -10 -30% 1.5 3 9 Within ±20% of initial measured value Less than 200% of specified maximum value Less than specified maximum value Within ±20% of initial measured value Less than 200% of specified maximum value Less than specified maximum value Within ±20% of initial measured value Less than 200% of specified maximum value Less than specified maximum...