Datasheet4U Logo Datasheet4U.com

NCA1042 - High-speed CAN Transceiver

General Description

6.1.

OVERVIEW 13 6.2.

DEVICE FUNCTIONAL MODES 14 6.3.

Key Features

  • Fully compatible with the ISO11898-2 standard.
  • I/O voltage range supports 3.3V and 5V MCU.
  • Power supply voltage VIO: 3V to 5.5V VCC: 4.5V to 5.5V.
  • Bus fault protection of -70V to +70V.
  • Transmit data (TXD) dominant time out function.
  • Bus dominant time out function in standby mode.
  • Very low-current Standby mode with wake-up capability.
  • Over current and over temperature protection.
  • Data rate: up to 5Mbps.
  • Low loop delay:.

📥 Download Datasheet

Datasheet Details

Part number NCA1042
Manufacturer NOVOSENSE
File Size 1.58 MB
Description High-speed CAN Transceiver
Datasheet download datasheet NCA1042 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCA1206NPO100J100TRPF Multilayer Ceramic Chip Capacitors NIC
NCA1206NPO100J16TRPF Multilayer Ceramic Chip Capacitors NIC
NCA1206NPO100J25TRPF Multilayer Ceramic Chip Capacitors NIC
NCA1206NPO100J50TRPF Multilayer Ceramic Chip Capacitors NIC
NCA1206NPO101J100TRPF Multilayer Ceramic Chip Capacitors NIC

Other Datasheets by NOVOSENSE

Part Number Description
NCA1042B High-speed CAN Transceiver
NCA1042B-Q1 High-speed CAN Transceiver
NCA1021S LIN transceiver
NCA1051 High-speed CAN Transceiver
NCA1051A High-speed CAN Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCA1042 High-speed CAN Transceiver with Standby Mode Datasheet (EN) 1.3 Product Overview The NCA1042 is a high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. The NCA1042 implements the CAN physical layer as defined in ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 5 Mbit/s. The NCA1042 provides thermal protection and transmit data dominant time out function. Key Features  Fully compatible with the ISO11898-2 standard  I/O voltage range supports 3.3V and 5V MCU  Power supply voltage VIO: 3V to 5.5V VCC: 4.5V to 5.