Datasheet4U Logo Datasheet4U.com

NCA9534B - 8-bit I2C-bus I/O port

General Description

7.1.

FUNCTIONAL BLOCK DIAGRAM 11 7.2.

7.2.1.

Key Features

  • I2C to Parallel Port Expander.
  • Operating power supply voltage range of 1.65 V to 5.5 V.
  • Low standby current.
  • Open-drain active-low interrupt output.
  • 5.5 V tolerant, 8 I/O ports which default to input mode.
  • Compatible with most microcontrollers.
  • Up to 400 kHz clock frequency.
  • Noise filter on SCL/SDA inputs.
  • Polarity Inversion register.
  • Internal power-on reset.
  • No glitch on power-up.
  • Address by three hardware address pins for use of up.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCA9535 Low-voltage 16-bit I2C and SMBus low-power I/O expander nexperia
NCA9535-Q100 Low-voltage 16-bit I2C and SMBus low-power I/O expander nexperia
NCA9539 Low-voltage 16-bit I2C and SMBus low-power I/O expander nexperia
NCA9539-Q100 Low-voltage 16-bit I2C and SMBus low-power I/O expander nexperia
NCA9547A 8-channel I2C-bus multiplexer nexperia

Other Datasheets by NOVOSENSE

Part Number Description
NCA9511 Hot Swappable I2C Bus and SMBus Buffer
NCA9555 16-bit I2C-bus I/O port
NCA9555B 16-bit I2C-bus I/O port
NCA1021S LIN transceiver
NCA1042 High-speed CAN Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCA9534B 8-bit I2C-bus I/O port with interrupt Datasheet (EN) 1.1 Product Overview The NCA9534B is a 16-pin device that provides 8 bits of General Purpose parallel Input/Output (GPIO) expansion for the two-line bidirectional I2C bus applications. The device can operate with a power supply voltage (VDD) range from 1.65 V to 5.5 V. It provides a simple solution when additional I/Os are needed for ACPI power switches, sensors, push buttons, LEDs, fans, etc. The NCA9534B consists of an 8-bit Configuration (Input or Output selection); Input, Output and Polarity Inversion (active HIGH or active LOW operation) registers. The system master can enable the I/Os as either inputs or outputs by writing to the I/O configuration bits.