NVE IL611
The IL600 series are isolated signal couplers with CMOS or open drain transistor outputs which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE’s patented IsoLoop® GMR sensor technology giving exceptionally small size and low power dissipation. The devices are available in SOIC, PDIP and MSOP packages and as bare die.| Part No. | IL611 |
|---|---|
| Datasheet | IL611 Download |
| Manufacturer |  NVE |
| Description | Passive Input Digital Isolators |
| Buy | Stock & Price |
FEATURES
●●
●
●
●
●
●
●
●
●
●
● 40 Mbps Data Rate Very Wide Input Voltage Range Open Drain or CMOS Outputs Failsafe Output (Logic high output for zero coil current ) Output Enable 3.3 V or 5 V Power Supply 2500 VRMS Isolation (1 Minute) Low Power Dissipation -40°C to 85°C Temperature Range 20 kV/µs Typical Common Mode Rejection UL1577 & IEC61010 Approval (pending) Available in MSOP, SOIC, and PDIP Packages and as Bare Die
APPLICATIONS
● CAN Bus/ Device Net● General Purpose Opto Replacement
● Wired-OR Alarms
● SPI interface DataSheet4U.com
● I2C
● RS 485, RS422, RS232
● Digital Fieldbus
● Size critical multi-channel applications
DESCRIPTION
A single resistor is used to set maximum input current for input voltages above 0.5 V. DataShee Isoloop® is a registered trademark of NVE Corporation. *U.S. Patent number 5,831,426; 6,300,617 and others. DataSheet4U.com ISB-DS-001-IL612-A, January 20, 2005 NVE Corp., 11409 Valley View Road, Eden Prairie, MN 55344-3617, U.S.A. Telephone: 952-829-921...
