IL613 Datasheet | NVE

Features - - - - - - - - - - - - 40 Mbps Data Rate Very Wide Input Voltage Range Open Drain or CMOS Outputs Failsafe Output (Logic high output for zero coil current ) Output Enable 3.3 V or 5 V Power Supply 2500 VRMS Isolation (1 Minute) Low Power Dissipation -40°C to 85°C Temperature Range 20 k V/µs Typical mon Mode Rejection UL1577 & IEC61010 Approval (pending) Available in MSOP, SOIC, and PDIP Packages and as Bare Die Applications - CAN Bus/ Device Net - General Purpose Opto Replacement - Wired-OR Alarms - SPI interface . - I2C - RS 485, RS422, RS232 - Digital Fieldbus - Size critical multi-channel applications Description The IL600 series are isolated signal couplers with CMOS or open drain transistor outputs which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE’s patented Iso Loop® GMR sensor technology giving exceptionally small size and low power dissipation. A single resistor is used to set maximum input current for input voltages above 0.5 V. The devices are available in SOIC, PDIP and MSOP packages and as bare die. Data Shee Isoloop® is a registered trademark of NVE Corporation. - U.S. Patent number 5,831,426; 6,300,617 and others. . ISB-DS-001-IL612-A, January 20, 2005 NVE Corp., 11409 Valley View Road, Eden Prairie, MN 55344-3617, U.S.A. Telephone: 952-829-9217, Fax 952-829-9189, .isoloop. © 2005 NVE Corporation .. IL610 IL611 IL612 IL613 IL614 Absolute Maximum Ratings(1) Parameters Storage Temperature Ambient Operating Temperature Supply Voltage Input Current Output Voltage Maximum Output Current ESD Symbol TS TA VDD IIN VO IO Min. -55 -55 -0.5 -25 -0.5 -10 Typ. Max. 150 125 7 25 VCC+0.5 10 Units °C °C V m A V m A k V Test Conditions Remended Operating Conditions Parameters Ambient Operating Temperature Supply Voltage Input Current Output Current Open Drain Reverse Voltage Open Drain Voltage Open Drain Load Current Input Signal Rise and Fall Times mon Mode Input Voltage Symbol TA...