Datasheet4U Logo Datasheet4U.com

74HC4852 - Dual 4-channel analog multiplexer/demultiplexer

General Description

The 74HC4852 is a high-speed Si-gate CMOS device and is specified in compliance with JEDEC standard no.

7A.

The 74HC4852 is a dual 4-channel analog multiplexer or demultiplexer with common select inputs (S0 and S1).

Key Features

  • injection-current effect control, which has excellent value in automotive.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC4852 Dual 4-channel analog multiplexer/demultiplexer nexperia
74HC4852-Q100 Dual 4-channel analog multiplexer/demultiplexer nexperia
74HC4852BQ Dual 4-channel analog multiplexer/demultiplexer nexperia
74HC4852D Dual 4-channel analog multiplexer/demultiplexer nexperia
74HC4852PW Dual 4-channel analog multiplexer/demultiplexer nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
74HC4060 14-stage binary ripple counter
74HC4351 8-channel analog multiplexer/demultiplexer
74HC4352 Dual 4-channel analog multiplexer/demultiplexer
74HC4353 Triple 2-channel analog multiplexer/demultiplexer
74HC4510 BCD up/down counter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC4852 Dual 4-channel analog multiplexer/demultiplexer with injection-current effect control Rev. 02 — 30 May 2007 Product data sheet 1. General description The 74HC4852 is a high-speed Si-gate CMOS device and is specified in compliance with JEDEC standard no. 7A. The 74HC4852 is a dual 4-channel analog multiplexer or demultiplexer with common select inputs (S0 and S1). Both multiplexers have a common active LOW enable input (E), four independent inputs/outputs (pins nY0 to nY3) and a common input/output (pin nZ). The device features injection-current effect control, which has excellent value in automotive applications where voltages in excess of the supply voltage are common. With E LOW, two of the eight switches are selected (low impedance ON-state) by S0 and S1.