Datasheet4U Logo Datasheet4U.com

KMA199E - Programmable angle sensor

Datasheet Summary

Description

The KMA199E is a magnetic angle sensor system.

The MagnetoResistive (MR) sensor bridges and the mixed signal Integrated Circuit (IC) are integrated into a single package.

This angular measurement system KMA199E is pre-programmed, pre-calibrated and therefore, ready to use.

Features

  • High precision sensor for magnetic.
  • Ratiometric output voltage angular measurement.
  • Programmable user adjustments,.
  • Independent from the magnetic field including zero angle and angular range strength above 35 kA/m.
  • Single package sensor system.
  • Programming via One-Wire Interface (OWI).
  • Magnet-lost and power-lost detection.
  • Fail-safe EEPROM.
  • Built-in transient protection.
  • High temperature range.
  • User-programmable 32-bit identifi.

📥 Download Datasheet

Datasheet preview – KMA199E

Datasheet Details

Part number KMA199E
Manufacturer NXP Semiconductors
File Size 268.62 KB
Description Programmable angle sensor
Datasheet download datasheet KMA199E Datasheet
Additional preview pages of the KMA199E datasheet.

📁 Similar Datasheet

  • KMA199 - Programmable angle sensor (NXP)
  • KMA1117 - 1A Low Dropout Positive Adjustable (Guangdong Kexin Industrial)
  • KMA010-xxx - Board to Board Interconnecttions (Advanced Interconnections)
  • KMA010P20Q - P-Ch Trench MOSFET (KEC)
  • KMA200 - Programmable angle sensor (NXP)
  • KMA210 - Programmable angle sensor (NXP)
  • KMA220 - Dual channel programmable angle sensor (NXP)
  • KMA221 - Programmable angle sensor (NXP)
  • KMA2D0DP20X - TSOP-6 PACKAGE (KEC)
  • KMA2D3P20S - P-Ch Trench MOSFET (KEC)
Other Datasheets by NXP Semiconductors

    Full PDF Text Transcription

    Click to expand full text
    KMA199E Programmable angle sensor Rev. 2 — 7 December 2011 Product data sheet 1. Product profile 1.1 General description The KMA199E is a magnetic angle sensor system. The MagnetoResistive (MR) sensor bridges and the mixed signal Integrated Circuit (IC) are integrated into a single package. This angular measurement system KMA199E is pre-programmed, pre-calibrated and therefore, ready to use. The KMA199E allows user specific adjustments of angular range, zero angle and clamping voltages. The settings are stored permanently in an Electrically Erasable Programmable Read-Only Memory (EEPROM). 1.
    Published: |