Datasheet4U Logo Datasheet4U.com

KMA199 - Programmable angle sensor

General Description

The KMA199 is a magnetic angle sensor system.

The MagnetoResistive (MR) sensor bridges and the mixed signal Integrated Circuit (IC) are integrated into a single package.

This angular measurement system KMA199 is pre-programmed, pre-calibrated and therefore, ready to use.

Key Features

  • High precision sensor for magnetic.
  • Ratiometric analog output voltage angular measurement.
  • Automotive qualified in accordance with.
  • Single package sensor system AEC-Q100.
  • Programmable user adjustments,.
  • High temperature range up to 160 C including zero angle and angular range.
  • Fail-safe EEPROM.
  • Built-in transient protection.
  • Independent from the magnetic field.
  • Programming via One-Wire Interface strength above 35 kA/m (OWI).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
KMA199E Programmable angle sensor NXP Semiconductors
KMA1117 1A Low Dropout Positive Adjustable Guangdong Kexin Industrial
KMA010-xxx Board to Board Interconnecttions Advanced Interconnections
KMA010P20Q P-Ch Trench MOSFET KEC
KMA2D0DP20X TSOP-6 PACKAGE KEC

Other Datasheets by NXP Semiconductors

Part Number Description
KMA200 Programmable angle sensor
KMA210 Programmable angle sensor
KMA220 Dual channel programmable angle sensor
KMA221 Programmable angle sensor
KMA310 Programmable angle sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
KMA199 Programmable angle sensor Rev. 2 — 7 December 2011 Product data sheet 1. Product profile 1.1 General description The KMA199 is a magnetic angle sensor system. The MagnetoResistive (MR) sensor bridges and the mixed signal Integrated Circuit (IC) are integrated into a single package. This angular measurement system KMA199 is pre-programmed, pre-calibrated and therefore, ready to use. The KMA199 allows user specific adjustments of angular range, zero angle and clamping voltages. The settings are stored permanently in an Electrically Erasable Programmable Read-Only Memory (EEPROM). 1.