PCA9522 Datasheet | NXP Semiconductors

description The PCA9522 is a monolithic bipolar integrated circuit for bus buffering in applications including I2C-bus, SMBus, etc. It includes hot insertion logic for detecting stop and idle conditions, making it ideal for live insertion into backplanes. The buffer extends the bus load limit by buffering both the SCL and SDA lines. The PCA9522 is a drop-in replacement for the IES5502, with only the maximum bus voltage reduced from 15 V to 10 V. Hot insertion logic allows the IC to be plugged into live backplanes without causing data corruption on the bus. The open-collector ready signal (RDY) indicates when the connection has been made. Precharging of the backplane ports minimizes disruptions to the bus during hot insertion. The enable function allows sections of the bus to be isolated. Individual parts of the system can be brought on-line successively. Bus level translation between a very wide range of bus voltages, from 1.8 V to 10 V, is supported. These features provide enormous flexibility in interfacing systems of different technologies, operating speeds and loads. The unique operation of the PCA9522 provides one of the fastest response times of such bidirectional buffers. It does this without the need for rise-time accelerators which, bined with low noise margins, may cause glitches outside of the I2C-bus specification. 2. Features and benefits - Dual, bidirectional unity gain isolating buffer - Hot insertion logic prevents data and clock bus corruption for live backplane applications - Pre-charge minimizes data corruption on live insertion - Supports I2C-bus (Standard-mode and Fast-mode), SMBus (standard and high power modes) and PMBus - Open-collector ready output (RDY) - Fast switching times allow operation in excess of 1 MHz - Enable (EN) allows bus segments to be disconnected - Low current standby mode when not enabled - High-impedance ports when IC unpowered - 6 m A (static) pull-down capability - Low noise susceptibility - Supports the connection of...