Datasheet4U Logo Datasheet4U.com

TDA8595 Datasheet I2c-bus Controlled 4 X 45 W Power Amplifer

Manufacturer: NXP Semiconductors

Overview: TDA8595 I2C-bus controlled 4 × 45 W power amplifier Rev. 02 — 21 November 2007 Product data sheet 1.

General Description

The TDA8595 is a complementary quad Bridge Tied Load (BTL) audio power amplifier made in BCDMOS technology.

It contains four independent amplifiers in BTL configuration.

Through the I2C-bus, diagnosis of temperature warning and clipping level is fully programmable and the information available via two diagnostic pins is selectable.

Key Features

  • 2.1 General I I I I I I I I I I I I Operates in legacy mode (non I2C-bus) and I2C-bus mode (3.3 V and 5 V compliant) Three hardware-programmable I2C-bus addresses Drive 4 Ω or 2 Ω loads Speaker fault detection Independent short-circuit protection per channel Loss of ground and open VP safe (with 150 mΩ series impedance and a supply decoupling capacitor of 2200 µF maximum) All outputs short-circuit proof to ground, supply voltage and across the load All pins short-circuit proof to ground Temperat.

More Datasheets from NXP Semiconductors

Part Number Description
TDA8566 stereo BTL car radio power amplifier
TDA8025 IC card interface
TDA8035HN Smart card interface
TDA8295 Digital global standard low IF demodulator
TDA8296 Digital global standard low IF demodulator
TDA8302 SMALL SIGNAL COMBINATION IC
TDA8777 Triple 10-bit video DAC up to 330 MHz sample frequency
TDA8922B 2 X 50 W class-D power amplifier
TDA8925 Power stage 2 x 15 to 25Wclass-D audio amplifier
TDA8928J Power stage 2 x 10 or 1 x 20 W class-D audio amplifie

TDA8595 Distributor