Datasheet4U Logo Datasheet4U.com

UM10512 - SSL2109 reference board

General Description

All information provided in this document is subject to legal disclaimers.

© NXP B.V.

2012.

19 April 2012 2 of 19 datasheet pdf - http://www.DataSheet4U.net/ NXP Semiconductors

Key Features

  • enable a driver to operate in Boundary Conduction Mode (BCM) with valley switching where the average current in the inductor is the output current. The SSL2109 turns off the MOSFET when the voltage on pin SOURCE reaches 500 mV. If the value of R4 in parallel with R5 is 1, the peak current is limited to 500 mA. See Equation 1 0.5   R5 + R4  I peak = -------------------------------------R5  R4 (1) When the MOSFET is turned off, inductor L2 is discharged and the current flowing through the ind.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UM10513 UBA2015AT Reference Design 120V NXP
UM1000 3 Watt DC-DC Converters UNIVERSAL MICROELECTRONICS
UM1000W-4 3 Watt DC/DC Converters UNIVERSAL MICROELECTRONICS
UM1001 3 Watt DC-DC Converters UNIVERSAL MICROELECTRONICS
UM1001W-4 3 Watt DC/DC Converters UNIVERSAL MICROELECTRONICS

Other Datasheets by NXP Semiconductors

Part Number Description
UM10562 LPC408x/407x User manual
UM10204 I2C-bus specification and user manual
UM10206 I2C Demonstration Board 2005-1 Quick Start Guide
UM10360 LPC17xx User manual
UM10406 SSL1523 high power factor 5W LED driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UM10512 SSL2109 reference board Rev. 1.1 — 19 April 2012 User manual Document information Info Keywords Abstract Content SSL2109, buck, controller, reference board, LED driver, LED retrofit lamp This document describes the performance, technical data and the connection of the SSL2109 reference board. The SSL2109 is an NXP Semiconductors controller IC intended to provide a low cost, small form factor LED driver. The reference board is intended to operate at 230 V or 120 V (AC), using an output voltage of 30 V or greater. http://www.DataSheet4U.net/ datasheet pdf - http://www.DataSheet4U.net/ NXP Semiconductors UM10512 SSL2109 reference board Revision history Rev v.1.1 v.1 Date 20120419 20120213 Description second issue first issue http://www.DataSheet4U.