Datasheet4U Logo Datasheet4U.com

74ALVC541 - Octal buffer / line driver

General Description

The 74ALVC541 is an octal non-inverting buffer/line drivers with 3-state bus compatible outputs.

The 3-state outputs are controlled by the output enable inputs OE0 and OE1.

A HIGH on OEn causes the outputs to assume a high-impedance OFF-state.

Key Features

  • Wide supply voltage range from 1.65 V to 3.6 V.
  • Complies with JEDEC standard:.
  • JESD8-7 (1.65 V to 1.95 V ).
  • JESD8-5 (2.3 V to 2.5 V).
  • JESD8B/JESD36 (2.7 V to 3.6 V).
  • 3.6 V tolerant inputs/outputs.
  • CMOS LOW power consumption.
  • Direct interface with TTL levels (2.7 V to 3.6 V).
  • Power-down mode.
  • Latch-up performance exceeds 250 mA.
  • ESD protection:.
  • HBM JESD22-A114E exceeds 2000 V.
  • MM JESD22-A115-A exceeds 200 V 3. Ordering informatio.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74ALVC541 Octal buffer/line driver nexperia
74ALVC541-Q100 Octal buffer/line driver nexperia
74ALVC573 Octal D-type transparent latch nexperia
74ALVC574 Octal D-type flip-flop nexperia
74ALVC00 Low Voltage Quad 2-Input NAND Gate Fairchild Semiconductor

Other Datasheets by NXP Semiconductors

Part Number Description
74ALVC574 Octal D-type flip-flop
74ALVC02 Quad 2-input NOR gate
74ALVC125 Quad buffer/line driver
74ALVC162334A 16-bit registered driver
74ALVC16244 2.5V/3.3V 16-bit buffer/line driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74ALVC541 Octal buffer/line driver; 3-state Rev. 3 — 20 January 2014 Product data sheet 1. General description The 74ALVC541 is an octal non-inverting buffer/line drivers with 3-state bus compatible outputs. The 3-state outputs are controlled by the output enable inputs OE0 and OE1. A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. 2. Features and benefits  Wide supply voltage range from 1.65 V to 3.6 V  Complies with JEDEC standard:  JESD8-7 (1.65 V to 1.95 V )  JESD8-5 (2.3 V to 2.5 V)  JESD8B/JESD36 (2.7 V to 3.6 V)  3.6 V tolerant inputs/outputs  CMOS LOW power consumption  Direct interface with TTL levels (2.7 V to 3.