A1006
Description
The A1006 Secure Authenticator Solution is a plete embedded security platform for electronic accessories, mobile phones, portable devices, puting and consumer electronic devices, and embedded systems where a strong security infrastructure is required for authentication and counterfeit detection and prevention. The A1006 provides an outstanding level of security, while overing the challenges of performance, power consumption and solution footprint.
Key Features
- Authentication time (on-chip calculations) < 50 milliseconds
- Non-Volatile Memory (NVM) for storage of device behavior, usage data, logistic information or any other arbitrary data
- Protection against Simple Power Analysis (SPA), Differential Power Analysis (DPA) and fault attacks
- One-Wire Interface (OWI) at 125 kbps, with ability to support bus-powered operation
- 400 Kbps I2C Fast-mode interface
- Power consumption: Maximum of 550 µA active
- Deep Sleep mode with very low power consumption of less than 3.3 µA at 3.3 V and < 1 µA at 1.8 V
- Entry to and exit from the Deep Sleep mode through I2C/OWI interface1
- ESD protection 8kV IEC61000-4-2 contact discharge (on OWI pin)
- EEPROM sections (4 Kbit total) 2 Kbit certificates (2 1 Kbit) 1 Kbit user memory 1 Kbit system memory
