Datasheet4U Logo Datasheet4U.com

BTS6201U - Wideband high linearity pre-driver amplifier

General Description

The BTS6201U is a wideband, high linearity, pre-driver amplifier for 5G massive MIMO infrastructure applications, with fast on-off switching to support TDD systems.

The amplifier is designed to operate between 2.3 GHz and 4.2 GHz.

It is housed in a 3 mm x 3 mm x 0.85 mm 16-terminal HVQFN package.

Key Features

  • High saturated output power Po(sat) = 28 dBm.
  • High power-gain Gp = 30.5 dB.
  • High linearity performance ACLR = -46 dBc.
  • Unconditionally stable.
  • Programmable bias current (via external resistor).
  • Fast switching to support TDD systems.
  • 5 V single supply, quiescent current 78 mA.
  • Small 16-terminal leadless package 3 mm x 3 mm x 0.85 mm.
  • ESD protection on all terminals.
  • Moisture sensitivity level 1 3 Applicatio.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BTS620L1 Smart Two Channel Highside Power Switch Siemens Semiconductor Group
BTS621L1 Smart Two Channel Highside Power Switch Siemens Semiconductor Group
BTS621L1 Smart Two Channel High-Side Power Switch Infineon Technologies AG
BTS629 Dimmer Infineon Technologies AG
BTS629 Dimmer Siemens Semiconductor

Other Datasheets by NXP Semiconductors

Part Number Description
BTS6302U Wideband high linearity pre-driver amplifier
BTS6303U Wideband high linearity pre-driver amplifier
BTS6403U Wideband high gain high linearity pre-driver amplifier
BTS7202U dual channel Receiver Front-End Module
BTS7203H RX Analog Front-End

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
BTS6201U Wideband high linearity pre-driver amplifier Rev. 5 — 5 September 2022 Product data sheet 1 General description The BTS6201U is a wideband, high linearity, pre-driver amplifier for 5G massive MIMO infrastructure applications, with fast on-off switching to support TDD systems. The amplifier is designed to operate between 2.3 GHz and 4.2 GHz. It is housed in a 3 mm x 3 mm x 0.85 mm 16-terminal HVQFN package. The amplifier is ESD protected on all terminals. 2 Features and benefits • High saturated output power Po(sat) = 28 dBm • High power-gain Gp = 30.