Datasheet4U Logo Datasheet4U.com

BTS6302U - Wideband high linearity pre-driver amplifier

General Description

The BTS6302U is a wideband, high linearity, pre-driver amplifier for 5G massive MIMO infrastructure applications, with fast on-off switching to support TDD systems.

The amplifier is designed to operate between 2.3 GHz and 5 GHz.

It is housed in a 3 mm × 3 mm × 0.85 mm 16-terminal HVQFN package.

Key Features

  • High saturated output power Po(sat) = 27.9 dBm.
  • High power-gain Gp = 38 dB.
  • High linearity performance ACLR = -43 dBc.
  • Unconditionally stable.
  • Fast switching to support TDD systems.
  • 5 V single supply, quiescent current 68 mA.
  • Small 16-terminal leadless package 3 mm x 3 mm x 0.85 mm.
  • ESD protection on all terminals.
  • Moisture sensitivity level 1 3.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BTS630 PWM Power Siemens Semiconductor Group
BTS610L1 Smart Two Channel Highside Power Switch (Overload protection Current limitation Short circuit protection Thermal shutdown) Siemens Semiconductor Group
BTS6110-1SJA Smart High-Side Power Switch Infineon Technologies
BTS611L1 Smart Two Channel Highside Power Switch Siemens Semiconductor Group
BTS611L1 Smart Two Channel High-Side Power Switch Infineon Technologies AG

Other Datasheets by NXP Semiconductors

Part Number Description
BTS6303U Wideband high linearity pre-driver amplifier
BTS6201U Wideband high linearity pre-driver amplifier
BTS6403U Wideband high gain high linearity pre-driver amplifier
BTS7202U dual channel Receiver Front-End Module
BTS7203H RX Analog Front-End

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
BTS6302U Wideband high linearity pre-driver amplifier Rev. 11 — 5 September 2022 Product data sheet 1 General description The BTS6302U is a wideband, high linearity, pre-driver amplifier for 5G massive MIMO infrastructure applications, with fast on-off switching to support TDD systems. The amplifier is designed to operate between 2.3 GHz and 5 GHz. It is housed in a 3 mm × 3 mm × 0.85 mm 16-terminal HVQFN package. The amplifier is ESD protected on all terminals. 2 Features and benefits • High saturated output power Po(sat) = 27.9 dBm • High power-gain Gp = 38 dB • High linearity performance ACLR = -43 dBc • Unconditionally stable • Fast switching to support TDD systems • 5 V single supply, quiescent current 68 mA • Small 16-terminal leadless package 3 mm x 3 mm x 0.