Datasheet4U Logo Datasheet4U.com

ISP1103DB - Universal Serial Bus transceiver

General Description

The ISP1103 is a single-chip generic Universal Serial Bus (USB) transceiver that is fully compliant with the Universal Serial Bus Specification Rev.

1.1.

Key Features

  • s s s s s s s s s s s s s s Complies with Universal Serial Bus Specification Rev. 1.1 Supports full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) serial data rates Slew-rate controlled differential data driver Differential input receiver with wide common-mode range and very high data input sensitivity Stable RCV output during SE0 condition Two single-ended receivers with hysteresis Supports ‘Philips Encoded Data Interface’ and ‘USB-IF Standard Data Interface’ Low-power operation in ‘suspend’ mode.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISP1181A Full-speed Universal Serial Bus peripheral controller Philips
ISP1181B Full-speed Universal Serial Bus peripheral controller Philips
ISP1016E High-Density Programmable Logic Lattice Semiconductor
ISP1032E High-Density Programmable Logic Lattice Semiconductor
ISP1032E High-Density Programmable Logic Lattice Semiconductor

Other Datasheets by NXP Semiconductors

Part Number Description
ISP1103D Universal Serial Bus transceiver
ISP1103DH Universal Serial Bus transceiver
ISP1103 Universal Serial Bus transceiver
ISP1102 Advanced Universal Serial Bus transceiver
ISP1102BS Advanced Universal Serial Bus transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ISP1103 Universal Serial Bus transceiver Rev. 01 — 4 October 1999 Preliminary specification 1. General description The ISP1103 is a single-chip generic Universal Serial Bus (USB) transceiver that is fully compliant with the Universal Serial Bus Specification Rev. 1.1. It allows 3.3 V USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) to interface with the physical layer of the Universal Serial Bus. It supports transmitting and receiving serial data at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates. It also supports the low-power single-ended input receiver interface in ‘suspend’ mode operation. The ISP1103 operates on a 3.3 V supply voltage.