Datasheet4U Logo Datasheet4U.com

ISP1103DH Datasheet Universal Serial Bus Transceiver

Manufacturer: NXP Semiconductors

Overview: ISP1103 Universal Serial Bus transceiver Rev. 01 — 4 October 1999 Preliminary specification 1.

General Description

The ISP1103 is a single-chip generic Universal Serial Bus (USB) transceiver that is fully pliant with the Universal Serial Bus Specification Rev.

1.1.

It allows 3.3 V USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) to interface with the physical layer of the Universal Serial Bus.

Key Features

  • s s s s s s s s s s s s s s Complies with Universal Serial Bus Specification Rev. 1.1 Supports full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) serial data rates Slew-rate controlled differential data driver Differential input receiver with wide common-mode range and very high data input sensitivity Stable RCV output during SE0 condition Two single-ended receivers with hysteresis Supports ‘Philips Encoded Data Interface’ and ‘USB-IF Standard Data Interface’ Low-power operation in ‘suspend’ mode.

More Datasheets from NXP Semiconductors

Part Number Description
ISP1103D Universal Serial Bus transceiver
ISP1103DB Universal Serial Bus transceiver
ISP1103 Universal Serial Bus transceiver
ISP1102 Advanced Universal Serial Bus transceiver
ISP1102BS Advanced Universal Serial Bus transceiver
ISP1102W Advanced Universal Serial Bus transceiver
ISP1104 Advanced Universal Serial Bus transceiver
ISP1104W Advanced Universal Serial Bus transceiver
ISP1105 Advanced Universal Serial Bus transceivers
ISP1105W Advanced Universal Serial Bus transceivers

ISP1103DH Distributor