ISP1301 Datasheet | NXP Semiconductors

scription The ISP1301 is a Universal Serial Bus (USB) On-The-Go (OTG) transceiver device that is fully pliant with Universal Serial Bus Specification Rev. 2.0 and On-The-Go Supplement to the USB Specification Rev. 1.0a. The ISP1301 can transmit and receive serial data at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates. It is ideal for use in portable electronics devices, such as mobile phones, digital still cameras, digital video cameras, Personal Digital Assistants (PDAs) and digital audio players. It allows USB Application Specific Integrated Circuits (ASICs), Programmable Logic Devices (PLDs) and any system chip set (with the USB host or device function built-in but without the USB physical layer) to interface to the physical layer of the USB. The ISP1301 can interface to devices with digital I/O voltages in the range of 1.65 V to 3.6 V. The ISP1301 is available in HVQFN24 package. 2. Features s Fully plies with: x Universal Serial Bus Specification Rev. 2.0 x On-The-Go Supplement to the USB 2.0 Specification Rev. 1.0a x On-The-Go Transceiver Specification (CEA- 2011) Rev. 1.0 s Can transmit and receive serial data at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates s Ideal for system ASICs or chip sets with built-in USB OTG dual-role core s Supports mini USB analog car kit interface s Supports various serial data interface protocols; transparent general-purpose buffer mode allows you to control the direction of data transfer s Supports data line and VBUS pulsing session request s Contains Host Negotiation Protocol (HNP) mand and status registers s Supports serial I2C-bus™ interface for OTG status and mand controls s 2.7 V to 4.5 V power supply input range for the ISP1301 s Built-in charge pump regulator outputs 5 V at current greater than 8 m A s Supports external charge pump s Supports wide range interfacing I/O voltage (VDD_LGC = 1.65 V to 3.6 V) for digital control logics Philips Semiconductors USB OTG transceiver s 8 k...