ISP1362 Datasheet PDF (Single-chip Universal Serial Bus On-The-Go Controller)

ISP1362 - Single-chip Universal Serial Bus On-The-Go Controller

Description

The ISP1362 is a single-chip Universal Serial Bus (USB) On-The-Go (OTG) controller integrated with the advanced NXP Slave Host Controller and the NXP ISP1181B Peripheral Controller.

The USB OTG Controller is compliant with Ref.

1 “On-The-Go Supplement to the USB 2.0 Speciﬁcation Rev.

Features

I Complies fully with: N Ref. 2 “Universal Serial Bus Speciﬁcation Rev. 2.0” N Ref. 1 “On-The-Go Supplement to the USB 2.0 Speciﬁcation Rev. 1.0a” I Supports data transfer at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) I Adapted from Ref. 4 “Open Host Controller Interface Speciﬁcation for USB Release 1.0a” I USB OTG: N Supports Host Negotiation Protocol (HNP) and Session Request Protocol (SRP) for OTG dual-role devices N Provides status and control signals for software implementation of HN.

Datasheet Details

Part number	ISP1362
Manufacturer	NXP
File Size	598.94 KB
Description	Single-chip Universal Serial Bus On-The-Go Controller
Datasheet	ISP1362 Datasheet
Additional preview pages of the ISP1362 datasheet.

📁 Similar Datasheet

ISP1362 - Single-chip Universal Serial Bus On-The-Go controller (Philips)

ISP1302 - Lite V4.2 Bluetooth Low Energy Module (Insight SiP)

ISP1303 - High Performance Bluetooth V4.2 & ANT Low Energy Module (Insight SiP)

ISP130301 - Bluetooth Low Energy Module (Insight SiP)

ISP1016E - High-Density Programmable Logic (Lattice Semiconductor)

ISP1032E - High-Density Programmable Logic (Lattice Semiconductor)

ISP1040B - Intelligent SCSI Processor (QLogic Corporation)

ISP1040B - SCSI I/O Processor (Qlogic)

ISP1040C - Intelligent SCSI Processor (QLogic Corporation)

Full PDF Text Transcription

Click to expand full text

ISP1362 Single-chip Universal Serial Bus On-The-Go Controller Rev. 05 — 8 May 2007 Product data sheet 1. General description The ISP1362 is a single-chip Universal Serial Bus (USB) On-The-Go (OTG) controller integrated with the advanced NXP Slave Host Controller and the NXP ISP1181B Peripheral Controller. The USB OTG Controller is compliant with Ref. 1 “On-The-Go Supplement to the USB 2.0 Speciﬁcation Rev. 1.0a”. The Host and Peripheral Controllers are compliant with Ref. 2 “Universal Serial Bus Speciﬁcation Rev. 2.0” (full-speed and low-speed support only), supporting data transfer at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s). The ISP1362 has two USB ports: port 1 and port 2.

Published: Nov 15, 2024 |