Datasheet4U Logo Datasheet4U.com

ISP1362 - Single-chip Universal Serial Bus On-The-Go controller

General Description

The ISP1362 is a single-chip Universal Serial Bus (USB) On-The-Go (OTG) controller integrated with the advanced Philips Slave Host Controller (PSHC) and the Philips ISP1181B Device Controller (DC).

The USB OTG controller is compliant with On-The-Go Supplement to the USB 2.0 Specification Rev.

1.0a.

Key Features

  • s Complies fully with: x Universal Serial Bus Specification Rev. 2.0 x On-The-Go Supplement to the USB 2.0 Specification Rev. 1.0a s Supports data transfer at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) s Adapted from Open Host Controller Interface Specification for USB Release 1.0a s USB OTG: x Supports Host Negotiation Protocol (HNP) and Session Request Protocol (SRP) for OTG dual-role devices x Provides status and control signals for software implementation of HNP and SRP x Provides progra.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISP1362 Single-chip Universal Serial Bus On-The-Go Controller NXP
ISP1301 Universal Serial Bus On-The-Go transceiver NXP
ISP1302 Lite V4.2 Bluetooth Low Energy Module Insight SiP
ISP1303 High Performance Bluetooth V4.2 & ANT Low Energy Module Insight SiP
ISP130301 Bluetooth Low Energy Module Insight SiP

Other Datasheets by Philips Semiconductors (now NXP Semiconductors)

Part Number Description
ISP1181A Full-speed Universal Serial Bus peripheral controller
ISP1181B Full-speed Universal Serial Bus peripheral controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ISP1362 Single-chip Universal Serial Bus On-The-Go controller Rev. 04 — 24 December 2004 Product data 1. General description The ISP1362 is a single-chip Universal Serial Bus (USB) On-The-Go (OTG) controller integrated with the advanced Philips Slave Host Controller (PSHC) and the Philips ISP1181B Device Controller (DC). The USB OTG controller is compliant with On-The-Go Supplement to the USB 2.0 Specification Rev. 1.0a. The host and device controllers are compliant with Universal Serial Bus Specification Rev. 2.0, supporting data transfer at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s). The ISP1362 has two USB ports: port 1 and port 2.