NXP Semiconductors LPC1102
the LPC1102: • Two extra GPIO pins (PIO0_1 and PIO0_6).| Part No. | LPC1102 |
|---|---|
| Datasheet | LPC1102 Download |
| Manufacturer |  NXP Semiconductors |
| Description | 32-bit ARM Cortex-M0 microcontroller |
| Buy | Stock & Price |
FEATURES AND BENEFITS
● System:● ARM Cortex-M0 processor, running at frequencies of up to 50 MHz.
● ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC).
● Serial Wire Debug.
● System tick timer.
● Memory:
● 32 kB on-chip flash programming memory.
● 8 kB SRAM.
● In-Application Programming (IAP) and In-System Programming (ISP) support via on-chip bootloader software.
● Digital peripherals:
● 11 General Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors and programmable open-drain mode. NXP Semiconductors LPC1102/1104 32-bit ARM Cortex-M0 microcontroller
● GPIO pins can be used as edge and level sensitive interrupt sources.
● Four general purpose counter/timers with a total of one capture input and 10 match outputs.
● Programmable windowed WatchDog Timer (WDT).
● Analog peripherals:
● 10-bit ADC with input multiplexing among five pins.
● Serial interfaces:
● UART with fractional baud rate generation, internal FIFO, and RS-485 support.
● One SPI controller with SSP features and with FIFO and multi-protocol capabilities (see Section 7.16).
