Datasheet4U Logo Datasheet4U.com

LPC2104 - Single-chip 32-bit microcontroller

General Description

The UART are based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, together with 128 kB of embedded high speed flash memory.

A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate.

Key Features

  • 2. Features 2.1 New features implemented in LPC2104/2105/2106/01 devices I Fast GPIO port enables port pin toggling up to 3.5 times faster than the original device and also allows for a port pin to be read at any time regardless of its function. I UART 0/1 include fractional baud rate generator, autobauding capabilities, and handshake flow-control fully implemented in hardware. I Buffered SSP serial controller supporting SPI, 4-wire SSI, and Microwire formats. I SPI programmable data length and.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LPC2101 (LPC2101 - LPC2103) Microcontrollers Philips
LPC2102 (LPC2101 - LPC2103) Microcontrollers Philips
LPC2103 (LPC2101 - LPC2103) Microcontrollers Philips
LPC2109 Single-chip 16/32-bit microcontrollers NXP Semiconductors
LPC2114 Single-chip 16/32-bit microcontrollers NXP Semiconductors

Other Datasheets by NXP Semiconductors

Part Number Description
LPC2101 Single-chip 16-bit/32-bit microcontrollers
LPC2102 Single-chip 16-bit/32-bit microcontrollers
LPC2103 Single-chip 16-bit/32-bit microcontrollers
LPC2105 Single-chip 32-bit microcontroller
LPC2106 Single-chip 32-bit microcontroller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LPC2104/2105/2106 Single-chip 32-bit microcontrollers; 128 kB ISP/IAP flash with 16/32/64 kB RAM Rev. 07 — 20 June 2008 Product data sheet 1. General description The UART are based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, together with 128 kB of embedded high speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. Due to their tiny size and low power consumption, these microcontrollers are ideal for applications where miniaturization is a key requirement, such as access control and point-of-sale.