LPC844 Overview
The LPC84x are an Arm Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 30 MHz. The LPC84x support up to 64 KB of flash memory and 16 KB of SRAM. The peripheral plement of the LPC84x includes a CRC engine, four I2C-bus interfaces, up to five USARTs, up to two SPI interfaces, Capacitive Touch Interface, one multi-rate timer, self-wake-up timer, SCTimer/PWM, one general purpose 32-bit...
LPC844 Key Features
- System
- Arm Cortex-M0+ processor (revision r0p1), running at frequencies of up to 30 MHz with single-cycle multiplier and fast s
- Arm Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC)
- System tick timer
- AHB multilayer matrix
- Serial Wire Debug (SWD) with four break points and two watch points. JTAG boundary scan (BSDL) supported
- Micro Trace Buffer (MTB)
- Memory
- Up to 64 KB on-chip flash programming memory with 64 Byte page write and erase
- Fast Initialization Memory (FAIM) allowing the user to configure chip behavior on power-up