MIMX8SL2AVNFZAB Datasheet | NXP Semiconductors

NXP Semiconductors Data Sheet: Technical Data IMX8XLB0AEC Rev. 3, 04/2024 i.MX 8XLite Automotive and Infotainment Applications Processors Introduction This data sheet contains specifications for the i.MX 8XLite processors. The devices have advanced multicore processing with V2X acceleration supported by Arm® cores. Memory interfaces for this device include: - LPDDR4 - DDR3L - 2× Quad SPI or 1× Octal SPI (Flex SPI) - e MMC 5.1, RAW NAND, and SD 3.0 MIMX8DL1AVNFZAB MIMX8DL2AVNFZAB MIMX8DL3AVNFZAB MIMX8SL1AVNFZAB MIMX8SL2AVNFZAB MIMX8SL3AVNFZAB 15 x 15 mm package case outline The i.MX 8XLite processors offer numerous advanced Features as shown in this table. Table 1. i.MX 8XLite advanced Features Function Multicore architecture provides 2× or 1× Cortex A35 and 1× Cortex-M4F cores Memory System Control Feature AArch64 for 64-bit support and new architectural Features AArch32 for full backward patibility with ARMv7 Cortex-A35 cores support ARM virtualization extensions. Cortex-M4F cores for real-time applications 16-bit LPDDR4 @1200 MHz with inline ECC 16-bit DDR3L @933 MHz with inline ECC 1× Flex SPI for fast boot from SPI NOR flash 2× SD 3.0 card interfaces 1× e MMC5.1/SD3.0 NAND (62-bit ECC support) System Control Unit (SCU): - Power control, clocks, reset - Boot ROMs - PMIC interface through a dedicated I2C channel - Resource Domain Controller Table continues on the next page... NXP reserves the right to change the production detail specifications as may be required to permit improvements in the design of its products. Table 1. i.MX 8XLite advanced Features (continued) Function I/O Feature 1× PCIe 3.0 (1-lane) with L1 substate support. PCIe 1.0 and 2.0 pliant. PCIe 3.0 capable, contact your NXP representative. 2× USB 2.0 ports 1× 1Gb Ethernet with AVB 1x 1Gb Ethernet with TSN 3× CAN/CAN-FD 6× UARTs: - 4× UARTs (3× with hardware flow control) - 1× UART tightly coupled with Cortex-M4F cores - 1× SCU UART (Note: SCU UART is dedicated to the SCU and not...