Datasheet4U Logo Datasheet4U.com

NX20P0477 - USB Type-C CC smart protection

Description

NX20P0477 is a single-chip USB Type-C (USB-C) port overvoltage protection solution integrating a corrosion prevention algorithm from moisture.

CC1/CC2 pins in the system side are protected from 28 V short to VBUS.

USB-C allows VBUS voltage to increase up to 20 V through Power delivery protocol.

Features

  • USB Type-C CC1 and CC2 short protection to VBUS.
  • CON_CC1 / CON_CC2: 28VDC AMR.
  • Rd clamp circuit in CON_CC1/CON_CC2 in dead battery condition.
  • Smart corrosion prevention scheme with low current source.
  • 250 mΩ Low RDSon switch.
  • Robust ESD immunity for CON_CC1/CON_CC2.
  • IEC 61000-4-2 contact discharge: 6 kV.
  • IEC 61000-4-2 air discharge: 8 kV.
  • +/-40 V surge protection on CON_CC1/CON_CC2 NXP Semiconductors NX20P0477 US.

📥 Download Datasheet

Datasheet preview – NX20P0477

Datasheet Details

Part number NX20P0477
Manufacturer NXP
File Size 309.32 KB
Description USB Type-C CC smart protection
Datasheet download datasheet NX20P0477 Datasheet
Additional preview pages of the NX20P0477 datasheet.

📁 Similar Datasheet

  • NX2016SF - Crystal Units (NDK)
  • NX2113 - 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER (Microsemi)
  • NX2113A - 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER (Microsemi)
  • NX2114 - 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER (Microsemi)
  • NX2114 - 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER (NEXSEM)
  • NX2114A - 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER (Microsemi)
  • NX2114A - 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER (NEXSEM)
  • NX2120 - SYNCHRONOUS PWM CONTROLLER (NEXSEM)
  • NX2124 - 300kHz SYNCHRONOUS PWM CONTROLLER (Microsemi)
  • NX2124A - 300kHz SYNCHRONOUS PWM CONTROLLER (Microsemi)
Other Datasheets by NXP
  • NX20P0407 - CC and SBU Protection
  • NX20P0408 - USB D+/D- protection
  • NX20P3483UK - high voltage sink/source combo switch
  • NX20P5090 - High voltage USB PD power switch
  • NX2020N2 - N-channel Trench MOSFET
  • NX2020P1 - single P-channel Trench MOSFET
  • NX2A4WP - A4WP compliant high frequency wireless charging receiver front end

Full PDF Text Transcription

Click to expand full text
NX20P0477 USB Type-C CC smart protection Rev. 1.0 — 3 February 2020 Product data sheet 1 General description NX20P0477 is a single-chip USB Type-C (USB-C) port overvoltage protection solution integrating a corrosion prevention algorithm from moisture. CC1/CC2 pins in the system side are protected from 28 V short to VBUS. USB-C allows VBUS voltage to increase up to 20 V through Power delivery protocol. CC1/2 pins can be shorted to VBUS due to mechanical twisting and sliding of the connector since USB-C connector contact pins are 25 % closer to each other than a micro USB connector. Moisture or fine dust may also cause the 20 V VBUS pin to be shorted to adjacent pins. NX20P0477 enables CC pins to be more robust in even abnormal conditions.
Published: |