Datasheet4U Logo Datasheet4U.com

NX3L1T53 Datasheet Low-ohmic Single-pole Double-throw Analog Switch

Manufacturer: NXP Semiconductors

Overview: NX3L1T53 Low-ohmic single-pole double-throw analog switch Rev. 02 — 14 April 2009 www.datasheet4u.com Product data sheet 1.

General Description

The NX3L1T53 provides one low-ohmic single-pole double-throw analog switch, suitable for use as an analog or digital multiplexer/demultiplexer.

It has a digital select input (S), two independent inputs/outputs (Y0, Y1), a common input/output (Z) and an active LOW enable input (E).

When pin E is HIGH, the switch is turned off.

Key Features

  • I Wide supply voltage range from 1.4 V to 4.3 V I Very low ON resistance (peak): N 1.6 Ω (typical) at VCC = 1.4 V N 1.0 Ω (typical) at VCC = 1.65 V N 0.55 Ω (typical) at VCC = 2.3 V N 0.50 Ω (typical) at VCC = 2.7 V N 0.50 Ω (typical) at VCC = 4.3 V I Break-before-make switching I High noise immunity I ESD protection: N HBM JESD22-A114E Class 3A exceeds 7500 V N MM JESD22-A115-A exceeds 200 V N CDM AEC-Q100-011 revision B exceeds 1000 V I CMOS low-power consumption I Latch-up performance exceeds.

More Datasheets from NXP Semiconductors

Part Number Description
NX3L1T384 Single-pole Single-throw Analog Switch
NX3L1T66 Low-ohmic Single-pole Single-throw Analog Switch
NX3L1G3157-Q100 Low-ohmic single-pole double-throw analog switch
NX3L1G384 Low-ohmic single-pole single-throw analog switch
NX3L1G53 Low-ohmic Single-pole Double-throw Analog Switch
NX3L1G66-Q100 Low-ohmic single-pole single-throw analog switch
NX3L2267 Low-ohmic dual single-pole double-throw analog switch
NX3L2267S Low-ohmic dual single-pole double-throw analog switch
NX3L2467 Double-pole Double-throw Analog Switch
NX3L2G66 Dual low-ohmic single-pole single-throw analog switch

NX3L1T53 Distributor