Datasheet4U Logo Datasheet4U.com

P3T1750DP - digital temperature sensor

General Description

The P3T1750DP is a temperature-to-digital converter from -40 °C to +125 °C range.

It uses an on-chip band gap temperature sensor and A-to-D conversion technique with an overtemperature detection.

Key Features

  • I3C (up to 12.5 MHz) and I2C (up to 3.4 MHz) interface.
  • 32 I2C target addresses.
  • 32 I3C Provisional-ID.
  • Supply range: 1.4 V to 3.6 V.
  • Programmable overtemperature alerts.
  • Resolution: 12 bits (0.0625 °C).
  • Accuracy:.
  • 1.4 V < VCC < 3.6 V.
  • ±1 °C (maximum) from -40 °C to +125 °C.
  • Low quiescent current: 4.1 μA supply current (typical).
  • ESD protection exceeds 2000 V HBM per JS-001-2017 and 1000 V CDM per.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by NXP Semiconductors

Part Number Description
P3T1755 digital temperature sensor
P3T1035AUK digital temperature sensor
P3T1035BUK digital temperature sensor
P3T1035CUK digital temperature sensor
P3T1035DUK digital temperature sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
P3T1750DP I3C, I2C-bus interface, 1 °C accuracy, digital temperature sensor Rev. 1.0 — 29 March 2023 Product data sheet 1 General description The P3T1750DP is a temperature-to-digital converter from -40 °C to +125 °C range. It uses an on-chip band gap temperature sensor and A-to-D conversion technique with an overtemperature detection. The device contains a number of configuration and data registers to store the device settings, such as device operation mode, and a temperature register (Temp) to store the digital temp reading that can be communicated by a controller via the 2-wire serial I3C (up to 12.5 MHz) and I2C (up to 3.4 MHz) interface.