P87C749 Datasheet | NXP Semiconductors

DESCRIPTION The Philips 83C749/87C749 offers many of the advantages of the 80C51 architecture in a small package and at low cost. The 8XC749 Microcontroller is fabricated with Philips high-density CMOS technology. Philips epitaxial substrate minimizes CMOS latch-up sensitivity. The 8XC749 contains a 2k × 8 ROM (83C749) EPROM (87C749), a 64 × 8 RAM, 21 I/O lines, a 16-bit auto-reload counter/timer, a fixed-priority level interrupt structure, an on-chip oscillator, a five channel multiplexed 8-bit A/D converter, and an 8-bit PWM output. The EPROM version of this device, the 87C749, is available in plastic one-time programmable (OTP) packages. Once the array has been programmed, it is functionally equivalent to the masked ROM 83C749. Thus, unless explicitly stated otherwise, all references made to the 83C749 apply equally to the 87C749. The 83C749 supports two power reduction modes of operation referred to as the idle mode and the power-down mode. FEATURES packages - Available in erasable quartz lid or One-Time Programmable plastic - 80C51 based architecture - Small package sizes - 28-pin DIP - 28-pin Shrink Small Outline Package (SSOP) - 28-pin PLCC - Wide oscillator frequency range: - Low power consumption: - Idle mode - Power-down mode 3.5MHz to 16MHz - Normal operation: less than 11m A @ 5V, 12MHz - 2k × 8 ROM (83C749) EPROM (87C749) - 64 × 8 RAM - 16-bit auto reloadable counter/timer - 5-channel 8-bit A/D converter - 8-bit PWM output/timer - 10-bit fixed-rate timer - Boolean processor - CMOS and TTL patible - Well suited for logic replacement, consumer and industrial applications PART NUMBER SELECTION ROM P83C749EBP N P83C749EBA A EPROM1 P87C749EBP N P87C749EBA A OTP OTP TEMPERATURE RANGE °C AND PACKAGE 0 to +70, 28-pin Plastic Dual In-line Package 0 to +70, 28-pin Plastic Leaded Chip Carrier 0 to +70, 28-pin Shrink Small Outline Package FREQUENCY 3.5 to 16MHz 3.5 to 16MHz 3.5 to 16MHz DRAWING NUMBER SOT117-2 SOT261-3 SOT341-1 P83C749EBD DB P87C749EBD DB...