P87C766 Datasheet | NXP Semiconductors

FEATURES GENERAL DESCRIPTION ORDERING INFORMATION BLOCK DIAGRAM PINNING INFORMATION MEMORY ORGANIZATION I/O FACILITY TIMERS AND EVENT COUNTERS REDUCED POWER MODE I2C-BUS SERIAL I/O INTERRUPT SYSTEM OSCILLATOR CIRCUITRY RESET CIRCUITRY PIN FUNCTION SELECTION ANALOG CONTROL ANALOG-TO-DIGITAL CONVERTERS (ADC) ON-SCREEN DISPLAY (OSD) EPROM PROGRAMMER SPECIAL FUNCTION REGISTERS ADDRESS MAP LIMITING VALUES CHARACTERISTICS PINNING CHARACTERIZATION PACKAGE OUTLINES SOLDERING DEFINITIONS LIFE SUPPORT APPLICATIONS PURCHASE OF PHILIPS I2C PONENTS P8x Cx66 family 1999 Mar 10 Philips Semiconductors Product specification Microcontrollers for PAL/SECAM TV with OSD and VST 1 1.1 FEATURES P80C51 CPU core P8x Cx66 family - 80C51 8-bit CPU - 64-kbyte Multiple Programming ROM (MTP ROM) - Two 16-bit timer/event counters - Crystal oscillator for system clock (up to 12 MHz) - 12 source, 12 vector interrupt structure with two priority levels - Enhanced architecture with: - Non-page orientated instructions - Direct addressing - Four 8-byte RAM register banks - Stack depth up to 128 bytes - Multiply, divide, subtract and pare instructions. 1.2 P8x Cx66 family - 110 horizontal starting positions controlled by software - Character size: 4 different character sizes on a line-by-line basis - Character matrix: 12 × 18 with no spacing between characters - Foreground colours: 8 on a character-by-character basis - Background/shadowing modes: two primary modes TV mode and Frame mode on a frame basis. Each primary mode has four sub-modes on a line basis: Sub-mode 1: Superimpose (no background) Sub-mode 2: North-West shadowing Sub-mode 3: Box background Sub-mode 4: Border shadowing - Background colours: 8 on a word-by-word basis, available in all four sub-modes - Display RAM starting address is programmable; fast switching between banks of display (RAM) characters is possible through software control - HSYNC driven PLL for OSD clock (4 to 12 MHz) - Character blinking ratio: 1 : 1 - Character...