Datasheet4U Logo Datasheet4U.com

PCA82C250 - CAN controller interface

General Description

The PCA82C250 is the interface between a CAN protocol controller and the physical bus.

The device provides differential transmit capability to the bus and differential receive capability to the CAN controller.

2.

Key Features

  • Fully compatible with the “ISO 11898” standard.
  • High speed (up to 1 MBd).
  • Bus lines protected against transients in an automotive environment.
  • Slope control to reduce Radio Frequency Interference (RFI).
  • Differential receiver with wide common-mode range for high immunity against ElectroMagnetic Interference (EMI).
  • Thermally protected.
  • Short-circuit proof to battery and ground.
  • Low-current Standby mode.
  • An unpowered node does not disturb the bus lines.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PCA82C251 CAN transceiver COMSET
PCA82C251 CAN transceiver Philips
PCA0102A LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP Z-Communications
PCA0163A LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP Z-Communications
PCA0174A-LF Telecommunications - Satellite Z-Communications

Other Datasheets by NXP Semiconductors

Part Number Description
PCA82C250T CAN controller interface
PCA82C251 CAN transceiver for 24 V systems
PCA82C252 Fault-tolerant CAN transceiver
PCA82C200 STAND-ALONE CAN-CONTROLLER
PCA84C122 8-bit microcontrollers for remote control transmitters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PCA82C250 CAN controller interface Rev. 06 — 25 August 2011 Product data sheet 1. General description The PCA82C250 is the interface between a CAN protocol controller and the physical bus. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller. 2.