Datasheet4U Logo Datasheet4U.com

PCA82C252 - Fault-tolerant CAN transceiver

General Description

Thermally protected PCA82C252 Bus lines protected against transients in an automotive environment

An unpowered node does not disturb the bus lines.

Low current sleep/standby mode with wake-up via the bus lines Power-on r

Key Features

  • Optimized for in-car low-speed communication.
  • Baud rate up to 125 kBaud.
  • Up to 15 nodes can be connected.
  • Supports unshielded bus wires.
  • Low RFI due to built-in slope control function.
  • Fully integrated receiver filters. Bus failure management.
  • Supports one-wire transmission modes with ground offset voltages up to 1.5 V.
  • Automatic switching to single-wire mode in the event of bus failure.
  • Automatic reset to differential mode.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PCA82C251 CAN transceiver COMSET
PCA82C251 CAN transceiver Philips
PCA0102A LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP Z-Communications
PCA0163A LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP Z-Communications
PCA0174A-LF Telecommunications - Satellite Z-Communications

Other Datasheets by NXP Semiconductors

Part Number Description
PCA82C250 CAN controller interface
PCA82C250T CAN controller interface
PCA82C251 CAN transceiver for 24 V systems
PCA82C200 STAND-ALONE CAN-CONTROLLER
PCA84C122 8-bit microcontrollers for remote control transmitters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS DATA SHEET PCA82C252 Fault-tolerant CAN transceiver Product specification Supersedes data of 1997 Mar 07 File under Integrated Circuits, IC18 1997 Oct 28 Philips Semiconductors Product specification Fault-tolerant CAN transceiver FEATURES Optimized for in-car low-speed communication • Baud rate up to 125 kBaud • Up to 15 nodes can be connected • Supports unshielded bus wires • Low RFI due to built-in slope control function • Fully integrated receiver filters. Bus failure management • Supports one-wire transmission modes with ground offset voltages up to 1.5 V • Automatic switching to single-wire mode in the event of bus failure • Automatic reset to differential mode if bus failure is removed.