Datasheet4U Logo Datasheet4U.com

PCA9500 - 8-bit I2C and SMBus I/O port

General Description

The PCA9500 is an 8-bit I/O expander with an on-board 2-kbit EEPROM.

The I/O expander's eight quasi-bidirectional data pins can be independently assigned as inputs or outputs to monitor board level status or activate indicator devices such as LEDs.

Key Features

  • Eight general purpose input/output expander/collector.
  • Drop-in replacement for PCF8574 with integrated 2-kbit EEPROM.
  • Internal 256  8 EEPROM.
  • Self timed write cycle.
  • 4 byte page write operation.
  • I2C-bus and SMBus interface logic.
  • Internal power-on reset.
  • Noise filter on SCL/SDA inputs.
  • Three address pins allowing up to eight devices on the I2C-bus/SMBus.
  • No glitch on power-up.
  • Supports hot insertion.
  • Power-up with all channels configu.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PCA9500 8-bit I2C-bus and SMBus I/O port with 2-kbit EEPROM Rev. 4.1 — 5 May 2017 Product data sheet 1. General description The PCA9500 is an 8-bit I/O expander with an on-board 2-kbit EEPROM. The I/O expander's eight quasi-bidirectional data pins can be independently assigned as inputs or outputs to monitor board level status or activate indicator devices such as LEDs. The system master writes to the I/O configuration bits in the same way as for the PCF8574. The data for each input or output is kept in the corresponding Input or Output register. The system master can read all registers. The EEPROM can be used to store error codes or board manufacturing data for read-back by application software for diagnostic purposes and is included in the I/O expander package.