TDA8592J - (TDA8592J/Q) I2C Bus Controlled 4 x 50W Power Amplifier

Product Overview

NXP

Part number	TDA8592J
Manufacturer	NXP
File Size	542.89 KB
Description	(TDA8592J/Q) I2C Bus Controlled 4 x 50W Power Amplifier
Datasheet	TDA8592J Datasheet
Additional preview pages of the TDA8592J datasheet.

The TDA8592J; TDA8592Q is a complementary quad BTL audio power ampliﬁer made in the BCDMOS technology.

s I2C-bus control s Hardware programmable I2C-bus address s Can drive a 2 Ω load with a battery voltage of up to 16 V and a 4 Ω load with a battery voltage of up to 18 V s DC-load detection: open, short and present s AC-load (tweeter) detection s Programmable clip detection: 1 % or 3 % s Programmable thermal protection pre-warning s Independent short-circuit protection per channel s Low gain line driver mode (20 dB) s Loss-of-ground and open VP safe s All outputs protected from short-circuit to.

📁 Similar Datasheet

Other Datasheets by NXP

TDA8592Q - (TDA8592J/Q) I2C Bus Controlled 4 x 50W Power Amplifier
TDA8591J - 4 X 44 W into 4 or 4 X 75 W into 2 quad BTL car radio power amplifier
TDA8594 - 4 x 50W power amplifier
TDA8596 - 4 x 45 W power amplifier
TDA8501 - PAL/NTSC encoder
TDA8505 - SECAM encoder

Published: Jul 6, 2006 |