TDA8592Q Datasheet (tda8592j/q) I2c Bus Controlled 4 X 50w Power Amplifier

Manufacturer: NXP Semiconductors

Overview: .. TDA8592J; TDA8592Q I2C-bus controlled 4 × 50 W power ampliﬁer Rev. 01 — 8 June 2004 Preliminary data sheet 1.

This datasheet includes multiple variants, all published together in a single manufacturer document.

Datasheet Details

Part number	TDA8592Q
Manufacturer	NXP Semiconductors
File Size	542.89 KB
Description	(TDA8592J/Q) I2C Bus Controlled 4 x 50W Power Amplifier
Datasheet	TDA8592Q TDA8592J Datasheet (PDF)

The TDA8592J;

TDA8592Q is a plementary quad BTL audio power ampliﬁer made in the BCDMOS technology.

It contains four independent ampliﬁers in Bridge Tied Load (BTL) conﬁguration.

s I2C-bus control s Hardware programmable I2C-bus address s Can drive a 2 Ω load with a battery voltage of up to 16 V and a 4 Ω load with a battery voltage of up to 18 V s DC-load detection: open, short and present s AC-load (tweeter) detection s Programmable clip detection: 1 % or 3 % s Programmable thermal protection pre-warning s Independent short-circuit protection per channel s Low gain line driver mode (20 dB) s Loss-of-ground and open VP safe s All outputs protected from short-circuit to.

Part Number	Description
TDA8592J	(TDA8592J/Q) I2C Bus Controlled 4 x 50W Power Amplifier
TDA8591J	4 X 44 W into 4 or 4 X 75 W into 2 quad BTL car radio power amplifier
TDA8594	4 x 50W power amplifier
TDA8596	4 x 45 W power amplifier
TDA8501	PAL/NTSC encoder
TDA8505	SECAM encoder
TDA8510J	26 W BTL and 2 x 13 W SE power amplifiers
TDA8511J	4 x 13 W single-ended power amplifiers
TDA8512J	26 W BTL and 2 x 13 W SE or 4 x 13 W SE power amplifier
TDA8540	4 X 4 video switch matrix