Datasheet4U Logo Datasheet4U.com

TDA8752A - Triple high-speed Analog-to-Digital Converter ADC

Description

The TDA8752A is a triple 8-bit ADC with controllable amplifiers and clamps for the digitizing of large bandwidth RGB signals.

Features

  • Triple 8-bit ADC.
  • Sampling rate up to 100 MHz.
  • IC controllable via a serial interface, which can be either I2C-bus or 3-wire, selected via a TTL input pin.
  • IC analog voltage input from 0.4 to 1.2 V (p-p) to produce full-scale ADC input of 1 V (p-p).
  • 3 clamps for programming a clamping code between.
  • 63.5 and +64 in steps of 1⁄2LSB.
  • 3 controllable amplifiers: gain controlled via the serial interface to produce a full scale resolution o.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA8715 8-Bit High-Speed Analog-to-Digital Converter Philips
TDA8777 Triple 10-bit video DAC up to 330 MHz sample frequency NXP Semiconductors
TDA8025 IC card interface NXP Semiconductors
TDA8035HN Smart card interface NXP Semiconductors
TDA8060ATS Satellite ZERO-IF QPSK down-converter Philips

Other Datasheets by NXP Semiconductors

Part Number Description
TDA8752 Triple high speed Analog-to-Digital Converter ADC
TDA8752B Triple high-speed Analog-to-Digital Converter 110 Msps ADC
TDA8753A YUV 8-bit analog-to-digital interface
TDA8754 Triple high speed ADC for LCD drive
TDA8755 YUV 8-bit video low-power analog-to-digital interface

Full PDF Text Transcription

Click to expand full text
INTEGRATED CIRCUITS DATA SHEET TDA8752A Triple high-speed Analog-to-Digital Converter (ADC) Product specification Supersedes data of 1998 Dec 14 File under Integrated Circuits, IC02 1999 Feb 24 Philips Semiconductors Product specification Triple high-speed Analog-to-Digital Converter (ADC) FEATURES • Triple 8-bit ADC • Sampling rate up to 100 MHz • IC controllable via a serial interface, which can be either I2C-bus or 3-wire, selected via a TTL input pin • IC analog voltage input from 0.4 to 1.2 V (p-p) to produce full-scale ADC input of 1 V (p-p) • 3 clamps for programming a clamping code between −63.
Published: |