Datasheet4U Logo Datasheet4U.com

TDA8786 - 10-bit analog-to-digital interface for CCD cameras

General Description

The TDA8786; TDA8786A is a 10-bit analog-to-digital interface for CCD cameras.

The device includes a correlated double sampling circuit, AGC, a soft clipper circuit and a low power 10-bit Analog-to-Digital Converter (ADC) together with its reference voltage regulator.

Key Features

  • Correlated Double Sampling (CDS), AGC, soft clipper, pre-blanking, 10-bit ADC and reference regulator included.
  • Fully programmable via a 3-wire serial interface.
  • Sampling frequency up to 18 MHz.
  • AGC gain from 3.5 to 33.5 dB (in 0.1 dB steps).
  • Programmable soft clipper for white compression (starting at 40% of the input signal).
  • Standby mode available for each block for power saving.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA8715 8-Bit High-Speed Analog-to-Digital Converter Philips
TDA8777 Triple 10-bit video DAC up to 330 MHz sample frequency NXP Semiconductors
TDA8025 IC card interface NXP Semiconductors
TDA8035HN Smart card interface NXP Semiconductors
TDA8060ATS Satellite ZERO-IF QPSK down-converter Philips

Other Datasheets by NXP Semiconductors

Part Number Description
TDA8786A 10-bit analog-to-digital interface for CCD cameras
TDA8780M True logarithmic amplifier
TDA8783 40 Msps/ 10-bit analog-to-digital interface for CCD cameras
TDA8784 18 Msps/ 10-bit analog-to-digital interface for CCD cameras
TDA8785 8-bit high-speed analog-to-digital converter with gain and offset controls

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS DATA SHEET TDA8786; TDA8786A 10-bit analog-to-digital interface for CCD cameras Product specification Supersedes data of 1997 May 20 File under Integrated Circuits, IC02 1997 Nov 17 Philips Semiconductors Product specification 10-bit analog-to-digital interface for CCD cameras FEATURES • Correlated Double Sampling (CDS), AGC, soft clipper, pre-blanking, 10-bit ADC and reference regulator included • Fully programmable via a 3-wire serial interface • Sampling frequency up to 18 MHz • AGC gain from 3.5 to 33.5 dB (in 0.