NXP Semiconductors TDA8786A
TDA8786A is a 10-bit analog-to-digital interface for CCD cameras. The device includes a correlated double sampling circuit, AGC, a soft clipper circuit and a low power 10-bit Analog-to-Digital Converter (ADC) together with its reference voltage regulator. The AGC and soft clipper circuits are controlled by on-chip DACs via a serial interface.TDA8786A Specifications
- Package : LFQFP
- Min Voltage : 4.5V
- Max Voltage : 5.5V
- Bits : 10
- Terminals : 48
- Circuits : 1
- Max Operating Temp : 70°C
- Min Operating Temp : -20°C
Source:
Octopart
| Part No. | TDA8786A |
|---|---|
| Datasheet | TDA8786A Download |
| Manufacturer |  NXP Semiconductors |
| Description | 10-bit analog-to-digital interface for CCD cameras |
| Buy | Stock & Price |
FEATURES
● Correlated Double Sampling (CDS), AGC, soft clipper, pre-blanking, 10-bit ADC and reference regulator included● Fully programmable via a 3-wire serial interface
● Sampling frequency up to 18 MHz
● AGC gain from 3.5 to 33.5 dB (in 0.1 dB steps)
● Programmable soft clipper for white compression (starting at 40% of the input signal)
● Standby mode available for each block for power saving applications (19 mW)
● 6 dB fixed gain analog output for analog iris control
● 8-bit and 10-bit DAC included for analog settings
● Low power consumption of only 475 mW (typ.)
● 5 V operation and 2.5 to 5 V operation for the digital outputs
● CDS control pulse: TDA8786 = HIGH; TDA8786A = LOW
● TTL compatible inputs, TTL and CMOS compatible outputs. QUICK REFERENCE DATA SYMBOL VCCA VCCD VCCO ICCA ICCD ICCO ADCres Vi(CDS)(p-p) GCDS fCLK(max) AGCdyn Ntot(rms) Ptot PARAMETER analog supply voltage digital supply voltage digital outputs supply voltage analog supply current digital supply current dig...
