Datasheet4U Logo Datasheet4U.com

TDA8932 - Class-D audio amplifer

Datasheet Summary

Description

The TDA8932 is a high efficiency class-D amplifier with low power dissipation.

The typical output power is 2 × 15 W in stereo half-bridge application (RL = 4 Ω) or 1 × 30 W typical in full-bridge application (RL = 8 Ω).

Features

  • Operating voltage from 10 V to 36 V asymmetrical or ±5 V to ±18 V symmetrical Mono-bridged tied load (full-bridge) or stereo single-ended (half-bridge).

📥 Download Datasheet

Datasheet preview – TDA8932

Datasheet Details

Part number TDA8932
Manufacturer NXP
File Size 347.10 KB
Description Class-D audio amplifer
Datasheet download datasheet TDA8932 Datasheet
Additional preview pages of the TDA8932 datasheet.

📁 Similar Datasheet

  • TDA8933 - Class-D audio amplifier (NXP Semiconductors)
  • TDA8920TH - Class-D audio amplifier 2 x 80W Single chip (Philips)
  • TDA8921TH - Class-D audio amplifier 2 x 50W single chip (Philips)
  • TDA8922B - 2 X 50 W class-D power amplifier (NXP Semiconductors)
  • TDA8925 - Power stage 2 x 15 to 25Wclass-D audio amplifier (NXP Semiconductors)
  • TDA8928J - Power stage 2 x 10 or 1 x 20 W class-D audio amplifie (NXP Semiconductors)
  • TDA8944AJ - 2 x 7 W BTL audio amplifier (Philips)
  • TDA8946AJ - 2 x 15 W BTL audio amplifier (Philips)
  • TDA8948 - 7W audio amplifier (ETC)
  • TDA8948J - 4-channel audio amplifier (NXP Semiconductors)
Other Datasheets by NXP
  • TDA8932B - Class-D audio amplifer
  • TDA8931 - Power comparator
  • TDA8939 - Zero dead time Class-D 7.5 A power comparator
  • TDA8920 - 2 x 50 W class-D power amplifier
  • TDA8920B - 2 X 100 W class-D power amplifier
  • TDA8920C - 2 x 110 W class-D power amplifier
  • TDA8922 - 2 x 25 W class-D power amplifier
  • TDA8922C - 2 x 75 W class-D power amplifier

Full PDF Text Transcription

Click to expand full text
TDA8932 Class-D audio amplifier Rev. 02 — 12 December 2006 Preliminary data sheet 1. General description The TDA8932 is a high efficiency class-D amplifier with low power dissipation. The typical output power is 2 × 15 W in stereo half-bridge application (RL = 4 Ω) or 1 × 30 W typical in full-bridge application (RL = 8 Ω). Due to the low power dissipation the device can be used without any external heat sink when playing music. If proper cooling via the printed-circuit board is implemented, a continuous output power of 2 × 15 W is feasible. Due to the implementation of thermal foldback, even for high supply voltages and/or lower load impedances, the device remains operating with considerable music output power without the need for an external heat sink.
Published: |