ADC10DV200 Datasheet | National Semiconductor Corporation

ADC10DV200 Dual 10-bit, 200 MSPS Low-Power A/D Converter with Parallel Outputs February 5, 2009 ADC10DV200 Dual 10-bit, 200 MSPS Low-Power A/D Converter with Parallel LVDS/CMOS Outputs .. General Description The ADC10DV200 is a monolithic analog-to-digital converter capable of converting two analog input signals into 10-bit digital words at rates up to 200 Mega Samples Per Second (MSPS). The digital output mode is selectable and can be either differential LVDS or CMOS signals. This converter uses a differential, pipelined architecture with digital error correction and an on-chip sample-and-hold circuit to minimize die size and power consumption while providing excellent dynamic performance. A unique sample-and-hold stage yields a full-power bandwidth of 900MHz. Fabricated in core CMOS process, the ADC10DV200 may be operated from a single 1.8V power supply. The ADC10DV200 achieves approximately 9.6 effective bits at Nyquist and consumes just 280m W at 170MSPS in CMOS mode and 450m W at 200MSPS in LVDS mode. The power consumption can be scaled down further by reducing sampling rates. Features - - - - - - - - - - Single 1.8V power supply operation. Power scaling with clock frequency. Internal sample-and-hold. Internal or external reference. Power down mode. Offset binary or 2's plement output data format. LVDS or CMOS output signals. 60-pin LLP package, (9x9x0.8mm, 0.5mm pin-pitch) Clock Duty Cycle Stabilizer. IF Sampling Bandwidth > 900MHz. Key Specifications - - - - - - - - - Resolution Conversion Rate ENOB SNR SINAD SFDR LVDS Power CMOS Power Operating Temp. Range 10 Bits 200 MSPS 9.6 bits (typ) @Fin=70MHz 59.9 d BFS (typ) @Fin=70MHz 59.9 d BFS (typ) @Fin=70MHz 82 d BFS (typ) @Fin=70MHz 450m W (typ) @Fs=200MSPS 280m W (typ) @Fs=170MSPS - 40°C to +85°C. Applications - - - - munications Medical Imaging Portable Instrumentation Digital Video Block Diagram © 2009 National Semiconductor Corporation .national....