Datasheet4U Logo Datasheet4U.com

ADC10D020 - Dual 10-Bit/ 20 MSPS/ 150 mW A/D Converter

General Description

The ADC10D020 is a dual low power, high performance CMOS analog-to-digital converter that digitizes signals to 10 bits resolution at sampling rates up to 30 MSPS while consuming a typical 150 mW from a single 3.0V supply.

No missing codes is guaranteed over the full operating temperature range.

Key Features

  • n n n n n n n n Internal sample-and-hold Internal reference capability Dual gain settings Offset correction Selectable straight binary or 2’s complement output Multiplexed or parallel output bus Single +2.7V to 3.6V operation Power down and standby modes Key Specifications Resolution 10 Bits Conversion Rate 20 MSPS ENOB 9.5 Bits (typ) DNL 0.35 LSB (typ) Conversion Latency Parallel Outputs 2.5 Clock Cycles.
  • Multiplexed Outputs, I Data Bus 2.5 Clock Cycles.
  • Multiplexed Outputs,.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADC10D020 150mW A/D Converter Texas Instruments
ADC10D040 267mW A/D Converter Texas Instruments
ADC10D1000 10-Bit Dual ADC Texas Instruments
ADC10D1000 Dual 1.0/1.5 GSPS Or Single 2.0/3.0 GSPS ADC National Semiconductor Corporation
ADC10D1000QML-SP Low-Power 10-Bit Dual 1-GSPS or Single 2-GSPS Analog-to-Digital Converter Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
ADC10D040 A/D Converter
ADC10DL065 A/D Converter
ADC1001 10-Bit uP Compatible A/D Converter
ADC10030 10-Bit/ 30 MSPS/ 125 mW A/D Converter
ADC10040 10-Bit/ 40 MSPS/ 3V/ 55.5 mW A/D Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ADC10D020 Dual 10-Bit, 20 MSPS, 150 mW A/D Converter April 2002 ADC10D020 Dual 10-Bit, 20 MSPS, 150 mW A/D Converter General Description The ADC10D020 is a dual low power, high performance CMOS analog-to-digital converter that digitizes signals to 10 bits resolution at sampling rates up to 30 MSPS while consuming a typical 150 mW from a single 3.0V supply. No missing codes is guaranteed over the full operating temperature range. The unique two stage architecture achieves 9.5 Effective Bits over the entire Nyquist band at 20 MHz sample rate. An output formatting choice of straight binary or 2’s complement coding and a choice of two gain settings eases the interface to many systems. Also allowing great flexibility of use is a selectable 10-bit multiplexed or 20-bit parallel output mode.