The ’LS503 register is basically the same as the ’LS502 except that it has an active LOW Enable (E) input that is used in cascading two or more packages for longer word lengths A HIGH signal on E after a START operation forces Q7 HIGH and prevents the device from accepting serial data With the E inp
Key Features
Y Performs serial-to-parallel conversion Y Expansion control for longer words Y Storage and control for.
Full PDF Text Transcription for DM74LS503 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
DM74LS503. For precise diagrams, and layout, please refer to the original PDF.
LS503 DM74LS503 8-Bit Successive Approximation Register (with Expansion Control) General Description The ’LS503 register is basically the same as the ’LS502 except that it has an active LOW Enable (E) input that is used in cascading two or more packages for longer word lengths A HIGH signal on E after a START operation forces Q7 HIGH and prevents the device from accepting serial data With the E input of an ’LS503 connected to the CC output of a preceding (more significant) device the ’LS503 will be inhibited until the preceding device is filled causing its CC output to go LOW This LOW signal then enables the ’LS503 to acce
DM74LS503 Datasheet
