Datasheet4U Logo Datasheet4U.com

DS3658 - Quad High Current Peripheral Driver

Description

The DS3658 quad peripheral driver is designed for those applications where low operating power high breakdown voltage high output current and low output ON voltage are required A unique input circuit combines TTL compatibility with high impedance In fact its extreme low input current allows it to be

Features

  • Y Y Y Y Y Y Y Y Y Y Y Y.

📥 Download Datasheet

Datasheet preview – DS3658

Datasheet Details

Part number DS3658
Manufacturer National Semiconductor
File Size 99.19 KB
Description Quad High Current Peripheral Driver
Datasheet download datasheet DS3658 Datasheet
Additional preview pages of the DS3658 datasheet.

📁 Similar Datasheet

  • DS3658 - Quad High Current Peripheral Driver (Texas Instruments)
  • DS36277 - Dominant Mode Multipoint Transceiver (Texas Instruments)
  • DS3630-945GSE - Mini ITX Main Board Manual (Advansus)
  • DS3647A - Quad Tri-state MOS Memory I/o Register (National Semiconductor Corporation)
  • DS3667 - 3 State Bidirectional Transceiver (National)
  • DS3680 - QUAD TELEPHONE RELAY DRIVER (Texas Instruments)
  • DS3690 - Three-Stateable Transmission Gate (Maxim Integrated Products)
  • DS36950 - Quad Differential Bus Transceiver (Texas Instruments)
  • DS36954 - Quad Differential Bus Transceiver (Texas Instruments)
  • DS3695A - Multipoint RS485/RS422 Transceivers (Texas Instruments)
Other Datasheets by National Semiconductor
  • DS3650 - Quad Differential Line Receivers
  • DS3651 - Quad High Speed MOS Sense Amplifiers
  • DS3654 - Printer Solenoid Driver
  • DS3656 - Quad Peripheral Driver
  • DS36149 - (DS36149 / DS36179) Hex MOS Drivers
  • DS36179 - (DS36149 / DS36179) Hex MOS Drivers
  • DS36276 - FAILSAFE Multipoint Transceiver
  • DS36277 - Dominant Mode Multipoint Transceiver

Full PDF Text Transcription

Click to expand full text
DS3658 Quad High Current Peripheral Driver March 1995 DS3658 Quad High Current Peripheral Driver General Description The DS3658 quad peripheral driver is designed for those applications where low operating power high breakdown voltage high output current and low output ON voltage are required A unique input circuit combines TTL compatibility with high impedance In fact its extreme low input current allows it to be driven directly by a CMOS device The outputs are capable of sinking 600 mA each and offer a 70V breakdown However for inductive loads the output should be clamped to 35V or less to avoid latch-up during turn off (inductive fly back protection refer AN-213) An onchip clamp diode capable of handling 800 mA is provided at each output for this purpose In addition the DS3658 incorpo
Published: |