DS8922 Datasheet | National Semiconductor

Description The DS8922/22A and DS8923A are Dual Differential Line Driver and Receiver pairs. These devices are designed specifically for applications meeting the ST506, ST412 and ESDI Disk Drive Standards. In addition, the devices meet the requirements of the EIA Standard RS-422. These devices offer an input sensitivity of 200 m V over a ± 7V mon mode operating range. Hysteresis is incorporated (typically 70 m V) to improve noise margin for slowly changing input waveforms. An input fail-safe circuit is provided such that if the receiver inputs are open the output assumes the logical one state. The DS8922A and DS8923A drivers are designed to provide unipolar differential drive to twisted pair or parallel wire transmission lines. plementary outputs are logically ANDed and provide an output skew of 0.5 ns (typ.) with propagation delays of 12 ns. Both devices feature TRI-STATE outputs. The DS8922/22A have independent control functions mon to a driver and receiver pair. The DS8923A has separate driver and receiver control functions. Power up/down circuitry is featured which will TRI-STATE the outputs and prevent erroneous glitches on the transmission lines during system power up or power down operation. The DS8922/22A and DS8923A are designed to be patible with TTL and CMOS. Features n n n n n n n n n n 12 ns typical propagation delay Output skew - ± 0.5 ns typical Meets the requirements of EIA Standard RS-422 plementary Driver Outputs High differential or mon-mode input voltage ranges of ± 7V ± 0.2V receiver sensitivity over the input voltage range Receiver input fail-safe circuitry Receiver input hysteresis - 70 m V typical Glitch free power up/down TRI-STATE outputs Connection Diagrams DS8922A Dual-In-Line DS008511-1 Order Number DS8922M, DS8922N, DS8922AM or DS8922AN See NS Package Number M16A or N16E TRI-STATE ® is a registered trademark of National Semiconductor Corp. © 1998 National Semiconductor Corporation DS008511 .national. Connection Diagrams (Continue...