Datasheet4U Logo Datasheet4U.com

DS92LV040A - 4 Channel Bus LVDS Transceiver

General Description

The DS92LV040A is one in a series of Bus LVDS transceivers designed specifically for high speed, low power backplane or cable interfaces.

The device operates from a single 3.3V power supply and includes four differential line drivers and four receivers.

Key Features

  • a flow through pin out which allows easy PCB routing for short stubs between its pins and the connector. The driver translates 3V LVTTL levels (single-ended) to differential Bus LVDS (BLVDS) output levels. This allows for high speed operation while consuming minimal power and reducing EMI. In addition, the differential signaling provides common mode noise rejection greater than ± 1V. The receiver threshold is less than +0/.
  • 70 mV. The receiver translates the differential Bus LVDS to stand.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS92LV040A 4-Channel Bus LVDS Transceiver Texas Instruments
DS92LV0411 Link-II Serializer/Deserializer Texas Instruments
DS92LV0412 Link-II Serializer/Deserializer Texas Instruments
DS92LV0421 10-MHz to-75 MHz Channel Link-II Serializer/Deserializer Texas Instruments
DS92LV0422 10-MHz to-75 MHz Channel Link-II Serializer/Deserializer Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
DS92LV0411 5 - 50 MHz Channel Link II Serializer/Deserializer
DS92LV0412 5 - 50 MHz Channel Link II Serializer/Deserializer
DS92LV0421 10 - 75 MHz Channel Link II Serializer/Deserializer
DS92LV0422 10 - 75 MHz Channel Link II Serializer/Deserializer
DS92LV010A Bus LVDS 3.3/5.0V Single Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS92LV040A 4 Channel Bus LVDS Transceiver August 2002 DS92LV040A 4 Channel Bus LVDS Transceiver General Description The DS92LV040A is one in a series of Bus LVDS transceivers designed specifically for high speed, low power backplane or cable interfaces. The device operates from a single 3.3V power supply and includes four differential line drivers and four receivers. To minimize bus loading, the driver outputs and receiver inputs are internally connected. The device also features a flow through pin out which allows easy PCB routing for short stubs between its pins and the connector. The driver translates 3V LVTTL levels (single-ended) to differential Bus LVDS (BLVDS) output levels. This allows for high speed operation while consuming minimal power and reducing EMI.