Datasheet4U Logo Datasheet4U.com

DS9627 - Dual Line Receiver

General Description

The DS9627 is a dual-line receiver which meets the electrical interface specifications of EIA RS-232C and MIL-STD-188C.

The input circuitry accommodates ± 25V input signals and the differential inputs allow user selection of either inverting or non-inverting logic for the receiver operation.

Key Features

  • n n n n n n n n EIA RS-232-C input standards MIL-STD-188C input standards Variable hysteresis control High common mode rejection R control (5 kΩ or 10 kΩ) Wired-OR capability Choice of inverting and non-inverting inputs Outputs and strobe TTL compatible Connection Diagram 16-Lead DIP DS009761-1 Top View Order Number DS9627MJ/883 See NS Package Number J16A For Complete Military 883 Specifications, see RETS Data Sheet. © 1999 National Semiconductor Corporation DS009761 www. national. com Abso.

📥 Download Datasheet

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
DS9622 Dual Line Receiver
DS9615 Dual Differential Line Receiver
DS96172 RS-485/RS-422 Quad Differential Line Drivers
DS96173 RS-485/RS-422 Quad Differential Line Receivers
DS96174 RS-485/RS-422 Quad Differential Line Drivers
DS96175 Quad Differential Line Receivers
DS96176 RS-485/RS-422 Differential Bus Transceiver
DS96176CN RS-485/RS-422 Differential Bus Transceiver
DS96177 RS-485/RS-422 Differential Bus Repeater
DS9636A RS-423 Dual Programmable Slew Rate Line Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS9627 Dual Line Receiver February 1996 DS9627 Dual Line Receiver General Description The DS9627 is a dual-line receiver which meets the electrical interface specifications of EIA RS-232C and MIL-STD-188C. The input circuitry accommodates ± 25V input signals and the differential inputs allow user selection of either inverting or non-inverting logic for the receiver operation. The DS9627 provides both a selectable hysteresis range and selectable receiver input resistance. When pin 1 is tied to V−, the typical switching points are at 2.6V and −2.6V, thus meeting RS-232-C requirements. When pin 1 is open, the typical switching points are at 50 µA and −50 µA, thus satisfying the requirements of MIL-STD-188C LOW level interface.