Datasheet4U Logo Datasheet4U.com

LM1882 - Programmable Video Sync Generator

General Description

The ’ACT715/LM1882 and ’ACT715-R/LM1882-R are 20-pin TTL-input compatible devices capable of generating Horizontal, Vertical and Composite Sync and Blank signals for televisions and monitors.

All pulse widths are completely definable by the user.

Key Features

  • n Maximum Input Clock Frequency > 130 MHz n Interlaced and non-interlaced formats available n Separate or composite horizontal and vertical Sync and Blank signals available n Complete control of pulse width via register programming n All inputs are TTL compatible n 8 mA drive on all outputs n Default RS170/NTSC values mask programmed into registers n 4 KV minimum ESD immunity n ’ACT715-R/LM1882-R is mask programmed to default to a Clock Enable state for easier start-up into 14.31818 MHz RS170 ti.

📥 Download Datasheet

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM1880 No-Holds Vertical/Horizontal
LM1881 LM1881 Video Sync Separator
LM1886 TV Video Matrix D to A
LM1889 LM1889 TV Video Modulator
LM1800 LM1800 Phase-Locked Loop FM Stereo Demodulator
LM1801 Battery Operated Power Comparator
LM1812 ULTRASONIC TRANSCEIVER
LM1815 Adaptive Variable Reluctance Sensor Amplifier
LM1815EP Enhanced Plastic Adaptive Variable Reluctance Sensor Amplifier
LM1818 Electronically Switched Audio Tape System

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM1882•54ACT715•LM1882-R•54ACT715-R Programmable Video Sync Generator December 1998 LM1882•54ACT715 LM1882-R•54ACT715-R Programmable Video Sync Generator General Description The ’ACT715/LM1882 and ’ACT715-R/LM1882-R are 20-pin TTL-input compatible devices capable of generating Horizontal, Vertical and Composite Sync and Blank signals for televisions and monitors. All pulse widths are completely definable by the user. The devices are capable of generating signals for both interlaced and noninterlaced modes of operation. Equalization and serration pulses can be introduced into the Composite Sync signal when needed. Four additional signals can also be made available when Composite Sync or Blank are used.