Datasheet4U Logo Datasheet4U.com

LM2724A - High Speed 3A Synchronous MOSFET Driver

General Description

The LM2724A is a dual N-channel MOSFET driver which can drive both the top and bottom MOSFETs in a push-pull structure simultaneously.

The LM2724A takes a logic input and splits it into two complimentary signals with a typical 20ns dead time in between.

Key Features

  • n n n n n n Shoot-through protection Input Under-Voltage-Lock-Out 3A peak driving current 195µA quiescent current 28V input voltage in buck configuration SO-8 and LLP packages.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM2724A High Speed 3A Synchronous MOSFET Driver Texas Instruments
LM27241 Synchronous Buck Regulator Controller Texas Instruments
LM2720 High Frequency Multi-phase PWM Controller Texas Instruments
LM27213 Single Phase Hysteretic Buck Controller Texas Instruments
LM2722 High Speed Synchronous/Asynchronous MOSFET Driver Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM27241 Synchronous Buck Regulator Controller
LM2720 PWM Controller
LM2722 MOSFET Driver
LM27222 High-Speed 4.5A Synchronous MOSFET Driver
LM2725 High Speed Synchronous MOSFET Drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM2724A High Speed 3A Synchronous MOSFET Driver June 2003 LM2724A High Speed 3A Synchronous MOSFET Driver General Description The LM2724A is a dual N-channel MOSFET driver which can drive both the top and bottom MOSFETs in a push-pull structure simultaneously. The LM2724A takes a logic input and splits it into two complimentary signals with a typical 20ns dead time in between. The built-in cross-conduction protection circuitry prevents the top and bottom MOSFETs from turning on simultaneously. With a bias voltage of 5V, the peak sourcing and sinking current for each driver of the LM2724A is about 3A.