LM2725 Datasheet | National Semiconductor

LM2725/LM2726 High Speed Synchronous MOSFET Drivers November 2000 LM2725/LM2726 High Speed Synchronous MOSFET Drivers General Description The LM2725/LM2726 is a family of dual MOSFET drivers that can drive both the top MOSFET and bottom MOSFET in a push-pull structure simultaneously. It takes a logic level PWM input and splits it into two plimentary signals with a typical 20ns dead time in between. The built-in shoot-through protection circuitry prevents the top and bottom FETs from turning on simultaneously. With a bias voltage of 5V, the peak sourcing and sinking current for each driver of the LM2725 is about 1.2A and that of the LM2726 is about 3A. In an SO-8 package, each driver is able to handle 50m A average current. Input UVLO (Under-Voltage-Lock-Out) ensures that all the driver outputs stay low until the supply rail exceeds the power-on threshold during system power on, or after the supply rail drops below power-on threshold by a specified hysteresis during system power down. The cross-conduction protection circuitry detects both the driver outputs and will not turn on a driver until the other driver output is low. The top gate bias voltage needed by the top MOSFET can be obtained through an external bootstrap structure. Minimum pulse width is as low as 55ns. Features n n n n n n High peak output current Adaptive shoot-through protection 36V SW pin absolute maximum voltage Input Under-Voltage-Lock-Out Typical 20ns internal delay Plastic 8-pin SO package Applications n High Current DC/DC Power Supplies n High Input Voltage Switching Regulators n Microprocessors Typical Application DS200072-1 Connection Diagram 8-Lead Small Outline Package DS200072-2 Top View © 2000 National Semiconductor Corporation DS200072 .national. LM2725/LM2726 Ordering Information Order Number LM2725 LM2726 Package Type LM2725M LM2725MX LM2726M LM2726MX M08A NSC Package Drawing Supplied As 95 Units/Rail 2500 Units/Reel 95 Units/Rail 2500 Units/Reel Pin...