Datasheet4U Logo Datasheet4U.com

LM433 - Dual Op Amp

General Description

The LM433 integrates two operational amplifiers and one 2.5V reference.

The reference is based on the LMV431 adjustable shunt regulator with the output voltage adjusted to a fixed 2.5V.

The Op Amps are similar to the LM358 with a common-mode input range that includes ground.

Key Features

  • Dual Op Amp Circuitry (Typical for VS = 5V) n Input offset voltage 0.6mV n Input offset current 1nA n Input bias current 3nA n Common-mode input voltage range n Power supply current 0V to VS.
  • 1V 150µA Reference Circuitry n Reference voltage 2.5V n Reference voltage deviation (.
  • 40˚C to 85˚C) 4mV n Sink Current Capability 0.2mA to 10mA Connection Diagram 8-Pin SOIC.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM4308 Mobile Pixel Link Two (MPL-2) - 18-bit CPU Display Interface Master/Slave Texas Instruments
LM431 Programmable Shunt Regulator Fairchild Semiconductor
LM431 Adjustable precision shunt regulators NXP
LM431 Programmable Shunt Regulator Fairchild Semiconductor
LM431 Adjustable Precision Zener Shunt Regulator Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM431 Adjustable Precision Zener Shunt Regulator
LM4310 RGB Display Differential Interface Deserializer
LM4312 RGB Display Differential Interface Serializer
LM432 Dual Op Amp with On-Chip Fixed 2.5V Reference
LM40 Hardware Monitor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM433 Dual Op Amp with On-Chip Fixed 2.5V Reference July 2001 LM433 Dual Op Amp with On-Chip Fixed 2.5V Reference General Description The LM433 integrates two operational amplifiers and one 2.5V reference. The reference is based on the LMV431 adjustable shunt regulator with the output voltage adjusted to a fixed 2.5V. The Op Amps are similar to the LM358 with a common-mode input range that includes ground. Integrating the reference and Op Amps creates a solution for low cost charging applications. Applications n Low cost charging circuitry n Power supplies and adapters Features Dual Op Amp Circuitry (Typical for VS = 5V) n Input offset voltage 0.