Datasheet4U Logo Datasheet4U.com

LM8801 - 600 mA Synchronous Step-Down DC-DC Converter

General Description

The LM8801 step-down DC-DC converter is optimized for powering ultra-low voltage circuits from a single Li-Ion cell and input voltage rails from 2.3V to 5.5V.

It provides up to 600 mA load current over the entire input voltage range.

Key Features

  • Over 90% efficiency at 6 MHz Operation 600 mA maximum load capability 6 MHz PWM fixed switching frequency (typ. ) 27 µA (typ. ) quiescent current in PFM mode Wide Input Voltage Range: 2.3V to 5.5V ±1.5% DC output voltage precision over temperature Best-in-class load transient response Low output ripple in PFM mode Automatic PFM/PWM mode switching Current overload and thermal shutdown protection Internal soft-start Micro SMD 6.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM8801 600mA Synchronous Step-Down DC-DC Converter Texas Instruments
LM8802 Single-Chip 8-Bit Microcomputer Sanyo Electric
LM8804 Single-Chip 8-Bit Microcomputer Sanyo Electric
LM8805 600mA CMOS L.D.O. Regulator HTC
LM8850 Factory Programmable Dual Remote-Diode Thermostat Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM88 Factory Programmable Dual Remote-Diode Thermostat
LM80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
LM809 3-Pin Microprocessor Reset Circuits
LM81 Serial Interface ACPI-Compatible Microprocessor System
LM810 3-Pin Microprocessor Reset Circuits

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM8801 High Precision 6MHz, 600 mA Synchronous Step-Down DC-DC Converter for Mobile Applications www.DataSheet4U.com April 20, 2009 LM8801 High Precision 6MHz, 600 mA Synchronous Step-Down DC-DC Converter for Mobile Applications General Description The LM8801 step-down DC-DC converter is optimized for powering ultra-low voltage circuits from a single Li-Ion cell and input voltage rails from 2.3V to 5.5V. It provides up to 600 mA load current over the entire input voltage range. The LM8801 has a mode-control pin that allows the user to select continuous PWM operation over the complete load range or an auto PFM-PWM mode that changes modes automatically depending on the load. During PWM mode, the device operates at a fixed-frequency of 6 MHz (typ.).